at last the word “unique” means something!


Chameleon has a versatile motherboard/daughterboard design. The powerful infrastructure, the motherboard, allows most of the functionality of any other preamp. It has RCA jacks emerging from the back, selector switch nestled closely between the RCA I/o jacks, muting circuitry(auto-mute at power-on, by toggle switch during operation), power supply, coupling caps, etc, but it lacks one thing - the actual amplifier circuitry of the Active Board. The motherboard allows you to set up the preamp with or without global negative feedback. Global feedback can be changed at any time by moving jumpers on a header block located beneath the Active Board.


Chameleon PC-1T Active Board with single 6DJ8/6922/6N23P which is operated in Grounded Cathode mode is the standard Active Board for Chameleon. On the PC-1T you can have “degenerative cathode feedback”, know as local feedback, or no local feedback. Other Active Boards include a dual 12AU7 CCGC (Grounded Cathode/Follower) circuit with moderate gain and low output impedance. There is also a 6 Volt heater version with the superb Russian 6N6P tubes. There are currently EIGHT, yes 8 Active Boards for the Chameleon. Active Boards can be delivered in custom form to provide optimum performance with a certain tube. There is even a special board for the highly regarded 5687/6900 tube. Others use the 6H30Pi, 6FQ7, 6N6P, 6N1P and the list grows longer. You can see our Active Board selection below. Who said listening couldn’t be fun! Chameleon makes you the final designer! Chameleon entrances with its sound, empowers with its flexibility. It engages you in a final sound quality that brings a smile every time.


Active Boards simply snap in place without tools. Now you can “roll” not only tubes, but circuits too! So you want a different but still great sound then just change the Active Board or try changing the feedback setting. And now you know why we call it the Chameleon. Fun!!


The Chameleon preamp has a very heavy-duty build quality. There are no flimsy metal panels here. A substantial shielded toroid power transformer is standard in all versions. More info, pictures to come soon.

Chameleon Preamp: $1495, standard PC-1T 6922 SE circuit board installed, Alps ‘Blue Beauty’ volume pot, British Silver-plated selector switch, mil-grade resistors, Special Digital input noise control, SILMIC II caps(tube board)

Chameleon Elite Preamp: $2995, PC-4T 6N6P SE Active Board installed or you may choose, Jensen four-pole power supply caps, hybrid coupling capacitors, British Silver-plated selector switch, superb SiC Schottky rectifiers, great sounding Takman CF resistors

Active Boards: All boards can be purchased for any Chameleon preamp version. As mentioned below all Active Boards are Elite version tube boards. All Active Boards are made to the highest Elite standards. Each board is $149, tubes are not included.

Phono stage Option: Add a twin 6N1P, 6DJ8, 6922 passive RIAA phono stage,  click here. Standard version is $695. Elite version is $995.

Pictured below are five currently available Active Boards: All boards have a 12-pin Gold-plated connector at CN1 to mate with the Chameleon motherboard. All versions use ceramic, silver-plated sockets. No tools are required to change out the Active Boards. All PC-XX boards will be made to the highest version Elite Ultra specifications with Silmic II caps, Mills ,Takman, TKD resistors (pictures to be updated soon)

Chameleon Preamplifier

For more descriptive information on various Chameleon Active Boards download this PDF file.

PC-1T: Grounded cathode amplifier for 6V 9-pin mini tubes. Standard tube is 6DJ8/6922/6N23P. 6H30Pi, 6N6P, 6CG7/6FQ7, 6N1P and others can be used with minor adjustments.

PC-2T: Grounded cathode amplifier for 5687 or exact equivalent tubes. This superbly linear tube has an unusual pin-out. The Bendix 6900 and equivalents are pricey but provide a superb alternative.

PC-3T: Grounded cathode amplifier for 12V 9-pin mini tubes. Standard tube is 12AU7/ECC82/ECC802S. Many 12V types usable with adjustments.

PC-4T: Grounded Cathode/Follower amplifier for 6V tubes. Standard tube is 6DJ8/6922. 6N6P, 6N1P, 6CG7/6FQ7. Many other 6V types can be used.

PC-5T: Grounded Cathode Amplifier/Follower for 12V tubes. Standard tube is 12AU7/ECC82/ECC802S. Many other 12V types can be used.

Pictures of the following coming soon:

PC-6T: Grounded cathode amplifier for 6V octal tubes. Standard tube is single 6SN7 - equivalents can be used. Russian 6H8C is compatible and superb.

PC-7T: Grounded cathode amplifier for 12V 9-pin mini tubes. Standard tubes are 12B4 single triode per tube pair. Only exact equivalent tubes can be used.

PC-8T: SRPP amplifier for 6V octal tubes. Standard tube is 6SN7 though others might be usable. Russian 6H8C is compatible.